JTC-35164 2、3爪內外通用拔輪器 @% TWJTC-35164
JTC-35164 2、3爪內外通用拔輪器 @% TWJTC-35164
•The jaws on this gear puller can be changed to operate
with 2 or 3 jaws with internal or external pulling action.
•Simply unscrew the knurled screw cap to release spring
and jaw cover, unhook the jaws and replace as necessary.
Replace cover plate and tighten spring with knurled screw.
•Keep clean and well oiled between uses.
•Always use eye protection when using this gear puller.
•在此拉马爪可以改变操作
与2或3与内部或外部的拉动作用的下巴。
•只需拧下滚花螺钉盖释放弹簧
颌覆盖，脱钩的颚，必要时应更换。
更换罩板并拧紧滚花螺钉弹簧。
•保持清洁和良好的使用。
•总是用眼睛保护用拉马时。
|
ITEM |
SIZE |
RANGE(mm) |
TYPE |
|
35164 |
4" |
76-102 |
2&3 JAWS |
|
35167 |
7" |
76-178 |
2&3 JAWS | | 
您的位置：
银行汇款